North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Re: power strip with individually monitorable outlet current
- From: Henry Yen
- Date: Tue Aug 09 20:05:29 2005
On Tue, Aug 09, 2005 at 04:37:04AM -0700, Mike Leber wrote:
> On Sun, 7 Aug 2005, Justin Kreger wrote:
> > At the now defunct redundant.com we used baytech strips with the ds-3
> > (not the circuit) modules to snmp enable the strips. We were able to
> > control each port, and monitor load on each port.
> > http://www.baytech.net/
> I had moderate success with this suggestion. Their technical support said
> the only product they had that does this is the 4 outlet RPC5 or RPC6
> (ethernet version vs serial version). Unfortunately, it costs $644 each
> (lowest price I've found so far) and accomplishes it's individual
> monitoring by replicating power in and power out plus an ethernet port 4
> times. Still, if it's the only one out there I guess they win (although
> at $150 per outlet, ouch, that goes over my $4000 budget for this).
well, you can save a bunch on a used one ($125 -- buy-it-now!):
eBay: BAYTECH DS4-RPC REMOTE POWER w/DS72 & DS74 DAC MODULES
does western telematic make anything that might fit your needs?
Henry Yen Aegis Information Systems, Inc.
Senior Systems Programmer Hicksville, New York