Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Overflow circuit

  • From: Patrick Murphy
  • Date: Fri Mar 26 18:36:37 2004

You may want to look at using H.323 gatekeepers with CAC (Call Admission
Control).

Here is a link to a Whitepaper on this Subject.

http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_white_paper09186a00800da467.shtml

Patrick

----- Original Message ----- 
From: "Mailing List Subscriptions" <jcc-list@thenetexpert.net>
To: <nanog@merit.edu>
Sent: Friday, March 26, 2004 7:54 PM
Subject: Overflow circuit


>
>
> I am looking for advice on technique or products that can solve the
> following challenge ...
>
> Two private line T1's between A and B - one terrestial T1 with >200 ms
RTT,
> the other T1 is over satellite with ~500 ms RTT. The circuits are being
used
> for mixed VoIP (70%) and data (30%) applications. To achieve optimal voice
> quality, we want to route all VoIP calls over the terrestial T1 until it
is
> "full", then divert all subsequent VoIP calls over the satellite T1 (**
> while existing VoIP calls continue to be routed over the terrestial T1).
>
> So it looks like I need per-flow (based on protocol, src IP, dst IP, src
> port, dst port) routing. It looks like MPLS Traffic Engineering can do the
> job. Is there anything else that can it with less complexity?
>
> Ideas or recommendations?
>
>
> Regards,
> Joe
>
>





Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.