North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Re: Cisco GSR, Gig Ethernet config?
- From: Ron Buchalski
- Date: Fri Feb 12 12:24:09 1999
>Date: Thu, 11 Feb 1999 15:19:55 -0800
>From: John Haskins <firstname.lastname@example.org>
>Subject: Cisco GSR, Gig Ethernet config?
>Our configuration: a GSR12008 with two interfaces, an OC12 ATM to
>the WAN and a gig ethernet to the campus, serving as a border drain.
>Does someone have real experience configuring this box with SFCs and
>CSCs? Is a full switch fabric (3 SFCs) and second CSC required or
>desirable for the gig ethernet interface to work? Could we expect to
Yes, in order to use the GE linecard you need to have the full switch
fabric installed. The second CSC is optional. Without it, the switch
fabric is non-redundant. With it, you have 1:4 redundancy, since the
CSC can back up either the CSC or any SFC.
>support a second gig ethernet interface? So many questions!
When equipped with the full switch fabric, the 12008 is a 40Gb/s router.
Each slot has a 5Gb/s connection to the switch matrix.
Given that you are using one OC12 ATM linecard (1.2Gb/s total bandwidth)
and one GE linecard (2Gb/s total bandwidth), you're not pushing slot
limits or router limits. There's plenty of available capacity to
support a second GE linecard.
Get Your Private, Free Email at http://www.hotmail.com