Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: IP over ATM overhead

  • From: pkavi
  • Date: Thu Mar 13 11:40:09 1997

     
The complete answer is that it depends upon packet size distributions.  
Let's assume that typical Internet type traffic patterns, which tend to 
have high percentages of packets at 40, 44, and 552 bytes.  
     
If you have a DS3 backbone, and have PLCP turned on, the maximum cell rate 
is 96,000 cells/sec.  If you multiply this value by the number of bits in 
the payload, you get:
     
        96000 cells/sec * 48 bytes/cell * 8 = 36.864 Mbps
     
But this is unrealistic, as it assumes perfect payload packing.  There are 
two other things that eat into the overhead value, namely the wasted 
padding, and the 8 byte SNAP header.
     
It's the SNAP header which causes most of the problems, forcing most small 
packets to consume two cells, with the second cell to be mostly empty 
padding.  This causes a loss of about another 16% from the 36.8 Mbps ideal 
throughput.
     
So the total throughput ends up being (for a DS3):
     
        DS3 Line Rate:              44.736
        PLCP Overhead              - 4.032            
        Per Cell Header:           - 3.840
        SNAP Header & Padding:     - 5.900
                                  =========
                                    30.960 Mbps

So, from a DS3 line rate of 44.736 Mbps, the total overhead is about 31%.  Hope 
this helps.

Prabhu Kavi
Manager, Network Architecture Group
Cascade Communications.
  







______________________________ Reply Separator _________________________________
Subject: IP over ATM overhead
Author:  Stephen Balbach <stephen@clark.net> at SMTPLINK
Date:    3/13/97 10:47 AM


     
We are installing an ATM backbone connection and wondering what level 
of overhead can be expected. Ive read from %10 to %50 - this will be a 
LAN connection so we can assume almost no cell loss. Our provider has 
said on average %12 bandwidth is overhead. It will be a Cisco->Cisco LAN 
configuration. Thanks!
     
Stephen Balbach
VP ClarkNet

- - - - - - - - - - - - - - - - -




Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.