Re: [OpenCALEA] Compile problem on tap.c

[Norman Brandinger]

Hi Steve,

CmIIh and HEADER are defined in calea.h.  Can you confirm they are there ?

Can you try to move the following two lines (in tap.c) to the top of the 
process_packet routine

   CmIIh cmiih;
   HEADER payload;

I'm using gcc version 4.1.2, but perhaps your C compiler isn't happy 
with a declaration in the middle of a routine.

Regards,
Norm

Steve Wagor wrote:
> Hello again,
>
> I installed libtool and reran ./configure in the open_calea directory 
> (v0.5) and still it comes up with libtool=no in that source= line when 
> doing a make.
>
> I deleted my directory of /root/open_calea (even though subversion 
> puts it into opencalea).
>
> I then used apt-get to install subversion and then used it to get the 
> latest using the svn command below:
>
> # Non-members may check out a read-only working copy anonymously over 
> HTTP.
> svn checkout */http/*://opencalea.googlecode.com/svn/trunk/ opencalea
>
>
> I noticed the new opencalea directory even has an executable in the 
> opencalea directory called libtool but even after running the 
> ./configure in this newly created directory of opencalea it still 
> gives me the same error.
>
> I am guessing I am missing a .h file or another define since it has 
> problems with these two lines in tap.c:
> CmIIh cmiih;
> HEADER payload;
>
> Steve...
>
>
>
> On 4/18/07, *Jesse Norell* <jesse@kci.net <mailto:jesse@kci.net>> wrote:
>
>     Hello,
>
>       I'm guessing that's the version 0.5 tarball?  Try the latest svn.
>     Although 0.5 shouldn't do that either ... maybe that "libtool=no"
>     is the
>     problem?  See if installing libtool fixes you up.
>
>
>
>     On Wed, 2007-04-18 at 15:06 -0600, Steve Wagor wrote:
>     > It's probably something I don't have installed but can someone
>     tell me
>     > why I would get this error when doing a make from the opencalea
>     > directory?
>     >
>     > ------------cut here------------
>     > root@mymachine:~/open_calea# make
>     > Making all in src
>     > make[1]: Entering directory `/root/open_calea/src'
>     > source='tap.c ' object='tap-tap.o' libtool=no \
>     >         DEPDIR=.deps depmode=gcc /bin/sh ../depcomp \
>     >         gcc -DPACKAGE_NAME=\"open_calea\" -DPACKAGE_TARNAME=
>     > \"open_calea\" -DPACKAGE_VERSION=\" 0.5\" -DPACKAGE_STRING=
>     > \"open_calea\ 0.5\" -DPACKAGE_BUGREPORT=\"mkarir@merit.edu\"
>     > -DPACKAGE=\"open_calea\" -DVERSION=\"0.5\" -DSTDC_HEADERS=1
>     > -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1
>     > -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
>     > -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
>     > -DHAVE_STDIO_H=1 -DHAVE_MATH_H=1 -DHAVE_TIME_H=1 -DHAVE_NETDB_H=1
>     > -DHAVE_NETINET_IN_H=1 -DHAVE_ARPA_INET_H=1  -I. -I.    -g -O2
>     -Wall -g
>     > -O2 -c -o tap-tap.o `test -f 'tap.c' || echo './'`tap.c
>     > tap.c: In function `process_packet':
>     > tap.c:78: parse error before `cmiih'
>     > tap.c:81: `cmiih' undeclared (first use in this function)
>     > tap.c :81: (Each undeclared identifier is reported only once
>     > tap.c:81: for each function it appears in.)
>     > tap.c:86: `payload' undeclared (first use in this function)
>     > make[1]: *** [tap-tap.o ] Error 1
>     > make[1]: Leaving directory `/root/open_calea/src'
>     > make: *** [all-recursive] Error 1
>     >
>     > ------------cut here------------
>     >
>     > The contents of my compile was done with this gcc:
>     > root@mymachine:~/open_calea# ls -l /usr/bin/gcc
>     > lrwxr-xr-x  1 root root 17 Apr 17 21:34 /usr/bin/gcc ->
>     /usr/bin/gcc-
>     > 2.95
>     >
>     >
>     > The distro I am doing this on is Debian (2.6.8-xxxxx ) and had no
>     > tcpdump or compiler or libraries on it so I got the following using
>     > apt-get install after doing an apt-get update:
>     > gcc
>     > tcpdump
>     > ngrep
>     > netcat
>     > gcc-2.95
>     > ncurses-dev
>     > libpcap0.8
>     > libpcap0.8-dev
>     >
>     > Also I linked gcc to the gcc-2.95 version.
>     >
>     > Thanks for any help.
>     >
>     > Steve...
>     >
>     --
>     Jesse Norell - jesse@kci.net <mailto:jesse@kci.net>
>     Kentec Communications, Inc.