Re: [OpenCALEA] Compile problem on tap.c

[Steve Wagor]

While waiting for more suggestions on how to proceed I tried using gcc version 4.1 instead of 2.95 and reran ./configure it seems to be doing something now :)

Basically I deleted the /usr/bin/gcc symbolic link and then linked up 
gcc-4.1 to gcc.

Now I have run out of space on the disk I am compiling on but it seems to have cured the tap.c compile problem.

Thanks for the help.

Steve...

On 4/18/07, Steve Wagor <stevew@apconnections.net> wrote:

Hello again,

I installed libtool and reran ./configure in the open_calea directory (v0.5) and still it comes up with libtool=no in that source= line when doing a make.

I deleted my directory of /root/open_calea (even though subversion puts it into opencalea).

I then used apt-get to install subversion and then used it to get the latest using the svn command below:

# Non-members may check out a read-only working copy anonymously over HTTP.
svn checkout http://opencalea.googlecode.com/svn/trunk/ opencalea

I noticed the new opencalea directory even has an executable in the opencalea directory called libtool but even after running the ./configure in this newly created directory of opencalea it still gives me the same error.

I am guessing I am missing a .h file or another define since it has problems with these two lines in tap.c:
CmIIh cmiih;
HEADER payload;

Steve...

On 4/18/07, Jesse Norell <jesse@kci.net> wrote:

Hello,

  I'm guessing that's the version 0.5 tarball?  Try the latest svn.
Although 0.5 shouldn't do that either ... maybe that "libtool=no" is the
problem?  See if installing libtool fixes you up.



On Wed, 2007-04-18 at 15:06 -0600, Steve Wagor wrote:
> It's probably something I don't have installed but can someone tell me
> why I would get this error when doing a make from the opencalea
> directory?
>
> ------------cut here------------
> root@mymachine:~/open_calea# make
> Making all in src
> make[1]: Entering directory `/root/open_calea/src'
> source=' tap.c ' object='tap-tap.o' libtool=no \
>         DEPDIR=.deps depmode=gcc /bin/sh ../depcomp \
>         gcc -DPACKAGE_NAME=\"open_calea\" -DPACKAGE_TARNAME=
> \"open_calea\" -DPACKAGE_VERSION=\" 0.5\" -DPACKAGE_STRING=
> \"open_calea\ 0.5\" -DPACKAGE_BUGREPORT=\"mkarir@merit.edu\"
> -DPACKAGE=\"open_calea\" -DVERSION=\"0.5\" -DSTDC_HEADERS=1
> -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1
> -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
> -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
> -DHAVE_STDIO_H=1 -DHAVE_MATH_H=1 -DHAVE_TIME_H=1 -DHAVE_NETDB_H=1
> -DHAVE_NETINET_IN_H=1 -DHAVE_ARPA_INET_H=1  -I. -I.    -g -O2 -Wall -g
> -O2 -c -o tap-tap.o `test -f 'tap.c' || echo './'`tap.c
> tap.c: In function `process_packet':
> tap.c:78: parse error before `cmiih'
> tap.c:81: `cmiih' undeclared (first use in this function)
> tap.c :81: (Each undeclared identifier is reported only once
> tap.c:81: for each function it appears in.)
> tap.c:86: `payload' undeclared (first use in this function)
> make[1]: *** [tap-tap.o ] Error 1
> make[1]: Leaving directory `/root/open_calea/src'
> make: *** [all-recursive] Error 1
>
> ------------cut here------------
>
> The contents of my compile was done with this gcc:
> root@mymachine:~/open_calea# ls -l /usr/bin/gcc
> lrwxr-xr-x  1 root root 17 Apr 17 21:34 /usr/bin/gcc -> /usr/bin/gcc-
> 2.95
>
>
> The distro I am doing this on is Debian (2.6.8-xxxxx ) and had no
> tcpdump or compiler or libraries on it so I got the following using
> apt-get install after doing an apt-get update:
> gcc
> tcpdump
> ngrep
> netcat
> gcc-2.95
> ncurses-dev
> libpcap0.8
> libpcap0.8-dev
>
> Also I linked gcc to the gcc-2.95 version.
>
> Thanks for any help.
>
> Steve...
>
--
Jesse Norell - jesse@kci.net
Kentec Communications, Inc.