North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: CPE Ethernet switch suggestions
- From: Rubens Kuhl
- Date: Mon Apr 05 10:25:54 2010
Although also being a small SOHO switch, may be Netgear GS-108T can
suit your needs.
> I want remove the initial staging step by allowing the installer to just
> plug the switch in and have the switch grab a config from a TFTP server
> noted by a DHCP option.
Not quite, it can download config from TFTP but only thru the web
interface. No CLI.
One thought: writing a script that the DHCP server would run to log
into a switch and grab a config.
> IGMP Snooping
> Dot1q VLAN tagging
> Preferably 8-ports
Check check check.
> A decent set of rate limiting options (5/10/20Mbps)
Humm... it has 4, 10 and 20 Mbps. In the future you can also have
40M/60M/100M/200M/400M/1000M.
> Extra bonus if it can also be PoE powered
Not from factory, but you might build a PoE power adapter to replace
the wall adapter it comes with.
The annoying thing about it's the "factory default" button which users
love to press when there is an outage "to see if it works again".
Cover it before sending such a unit to field.
Rubens
|
