North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: T1 aggregation and data center gateways
- From: Michael K. Smith
- Date: Tue Mar 09 20:23:58 2010
Hi Tim:
On 3/9/10 5:00 PM, "Tim Sanderson" <tims@donet.com> wrote:
> Currently have T1 aggregation on some Cisco 7206VXR routers. Core switches and
> data center gateways on a couple of Cisco 6509's. Looking for a model that
> could collapse both functions into just two devices, one being for hardware
> redundancy. Any recommendations on a good L3 switch that is also a good T1
> aggregation device? Anyone have any experience with the newer Cisco stuff like
> the ASR 1000/7600/CRS-1?
>
> Tim Sanderson
You might want to post this over to cisco-nsp because there are lots of
options depending upon your configuration. If you're looking at port
density it seems to me you would want your router/switch to have the biggest
mux ports possible. So, you could look at OC-3 or even higher in the router
platforms. You can get up to an OC-12 channelized, but it all depends upon
your configuration.
Regards,
Mike
|
