North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: ISP customer assignments
- From: Leo Bicknell
- Date: Tue Oct 13 21:24:48 2009
In a message written on Tue, Oct 13, 2009 at 08:14:40PM -0500, Chris Adams wrote:
> I would expect you just assign static addresses to servers. Are there
> pros/cons to using /64 or something else there? If I'm statically
> assigning IP (and DNS, etc. servers) info, why would I not just
> configure the gateway there as well (especially if you just make all
> local router interfaces ::1)?
All of our servers are in binary coded hex. :) That is, if your IPv4
address is 10.12.3.187, your IPv6 address is A:B:C:D::187. The router
is ::1, just as in IPv4, and servers have static routes.
We still use /64's everywhere. You may want to use temporary (privacy)
addresses outbound. You many want to allow a server to use EUI-64 to
get an address while doing an install, or similar.
> What about anycast-type addresses (e.g. DNS servers)? I route a few
> server IPv4 /32s around in my network; do you assign a /128, a /64 (with
> only one address in use), a /112, or something else?
/128's for loopbacks, anycast addreses, and similar here. Typically out
of a loopback /64.
--
Leo Bicknell - bicknell@ufp.org - CCIE 3440
PGP keys at http://www.ufp.org/~bicknell/
Attachment:
pgp00034.pgp
Description: PGP signature
|
