North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: Giga fiber Tap
- From: Sean Donelan
- Date: Fri Nov 30 11:44:47 2007
On Fri, 30 Nov 2007, Frank Coluccio wrote:
Unless I'm misreading the requirement, this
sounds like a job for a Calient or a Glimmerglass
optical switch, capable of non-intrusive bridging
and/or insertion. For large jobs, in any case.
A demo of the Glimmerglass device can be viewed
on the company's "Government Signals Monitoring
and Analysis" page:
http://www.glimmerglass.com/defense.aspx
This is probably bit more than would be needed for the apparent
application of monitoring a particular routing point for a LAN. A
simple passive fiber tap may be sufficient.
An optical switch may be more suitable when you have large numbers of
sources and need to dynamically monitor a subset of different fibers
on a regular basis. Installing a switch is less useful if you need to
check a particular fiber on a permanent basis.
Of course, if you already have an "optical DACS" in your network, then
it makes sense to use it instead of installing something else.
|
