Re: problem with BGP or I am an Idiot

[Jay Hennigan]

Philip Lavine wrote:
> To all,
>
> Probabaly the the latter; however here is the situation. I am advertising a rte 1.1.1.1 via BGP to the Internet via ISP_A via my location in NJ. At my other location in CA where I am advertising another rte 2.2.2.2 via BGP to the Internet via the same ISP_A. I am using the same AS for both routes. 
Don't do that then.

> For some reason on my rtr advertising the 2.2.2.2 rte I am unable to see the 1.1.1.1 rte "% Network not in table". I know 1.1.1.1 rte is valid it shows up in looking glass and ISP_A has it on the peer 2.2.2.2 recevies full Internet rtes from. Further verification: I add a static rte on 2.2.2.2 rtr to 1.1.1.1 and its routable???
The reason is that a BGP router won't accept a route containing its own 
AS from an external peer.

You can add a static route on both routers to the other network with the 
gateway of your ISP.  A floating static default may also work.  Or get a 
 different AS for the other end.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay@impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV