North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Re: T1 bonding
- From: Elijah Savage
- Date: Tue Jan 24 20:22:05 2006
-----BEGIN PGP SIGNED MESSAGE-----
Scott Morris wrote:
> If you're treating them as two separate links (e.g. two POPs, etc.) then
> that's correct, it'll be done by the routers choice of load-balancing (L3).
> If you are going to the same POP (or box potentially) you can do MLPPP and
> have a more effective L2 load balancing.
> Otherwise, it's possible to get an iMux DSU (Digital Link is a vendor as I
> recall, but there may be others) that allow that magical bonding to occur
> prior to the router seeing the link. At that point, the router just sees a
> bigger line coming in (some do 6xT-1 and have a 10meg ethernet output to
> your router).
> If you're seeing the balancing the way that you are, most likely that vendor
> (I have no specific knowledge about the A-vendor) is doing usage-based
> aggregation which isn't exactly a balancing act. The ones at some of my
> sites are MLPPP which is a vendor-agnostic approach for the most part.
> -----Original Message-----
> From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of
> Elijah Savage
> Sent: Tuesday, January 24, 2006 7:28 PM
> To: Matt Bazan
> Cc: email@example.com
> Subject: Re: T1 bonding
> Matt Bazan wrote:
>>> Can someone shed some technical light on the details of how two T1's
>>> are bonded (typically). We've got two sets of T's at two different
>>> location with vendor 'X' (name starts w/ an 'A') and it appears that
>>> we're really only getting about 1 full T's worth of bandwidth and
>>> maybe 20% of the second.
>>> Seems like they're bonded perhaps using destination IP? It's a vendor
>>> managed solution and I need to get some answers faster than they're
>>> coming in. Thanks.
> More than likely they are not bonded t1's they are just load balanced by the
> router which by default on Cisco is per session. Meaning pc1 to t1#1, pc2to
> t1#2, pc3 to t1#1. If they are truly bonded with some sort of MUX for a 3
> meg port then you would not see the results you are seeing.
> The Information Technology News Center
Remember he said both t1's are coming from different vendors, which
would only leave the Mux route which is why I said what I said :)
The Information Technology News Center
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
-----END PGP SIGNATURE-----