North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Re: why upload with adsl is faster than 100M ethernet ?
- From: Gordon
- Date: Fri Oct 15 10:05:48 2004
Alex Bligh wrote:
--On 15 October 2004 13:33 +0200 Iljitsch van Beijnum
However, the cause can also be rate limiting. Rate limiting is deadly
TCP performance so it shouldn't be used on TCP traffic.
Add "unless appropriate shaping is performed prior to the rate-limiting
with the parameters carefully tuned to the rate-limiting"
You can also see an effect similar to rate-limiting from inadequate
buffering where there is a higher input media speed than output.
The following link provided a great overview of tcp throughput
I can't remember what the tool is now, but there used to be a tool which
netiq's qcheck (the artist formerly known as ganymede) is a utility we
commonly use to prove to customers that they are indeed receiving
worked like ping but sent a udp stream at a given rate per second and
you about packet drops, and also allowed for some parameter to be tweaked
to give stochastic variation in interpacket delay (i.e. massive jitter).
You could use this to show inadequate buffering on gigabit interfaces
a 2Mb/s stream would get through, but if you wound up the jitter
sufficiently, a whole burst of packets would arrive together and a
interface with (deliberately) misconfigured buffers would then drop