Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: fiber cut 19 May/PM -> 20 May/AM in Ashburn, VA (lawnmower?!)

  • From: Burton, Chris
  • Date: Fri May 21 13:32:58 2004

	I would agree that most Telco's put the initial ring fiber pairs
in the same conduit due to cost savings and build out permits; but
sometimes the issue is not cost; but laziness on the part of the company
or the engineer.  In the past I worked for a company that designed and
installed MAN rings and more often then not the company would work a
ring into a single conduit just because it was easier to do.

Chris Burton
Network Engineer
Walt Disney Internet Group: Network Services

The information contained in this e-mail message is confidential,
intended only for the use of the individual or entity named above. If
the reader of this e-mail is not the intended recipient, or the employee
or agent responsible to deliver it to the intended recipient, you are
hereby notified that any review, dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
e-mail in error, please contact Walt Disney Internet Group at
206-664-4000.



-----Original Message-----
From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of
Robert E. Seastrom
Sent: Friday, May 21, 2004 5:09 AM
To: Dan Armstrong
Cc: nanog@merit.edu
Subject: Re: fiber cut 19 May/PM -> 20 May/AM in Ashburn, VA
(lawnmower?!)



Dan Armstrong <dan@beanfield.com> writes:

> Forgive me, but
> 
> Isn't Sonet usually deployed in a ring?  Why the heck would a fiber
> this important not be?

sonet, obviously, does not *have* to be in a ring, but it often is.
unfortunately, a fair percentage of the time, the additional
protection offered by a ring topology is a mirage, due to a
configuration known as "collapsed backbone".  in this instance, both
pairs of fiber ride in the same conduit for some portion of the
distance (most notably laterals to building entrances, but sometimes
for a fair distance down the street).  the driving factor in building
this way is usually cost savings.

while this arrangement does protect against failures of optics and
electronics (which in fairness are indeed more common than fiber
cuts), it provides no protection against hungry construction (or in
this case, lawn maintenance) equipment.

                                        ---rob






Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.