Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

RE: ntp config tech note

  • From: Hannigan, Martin
  • Date: Thu May 20 18:06:51 2004



That's NTPv4 isn't it? 

I also prefer to use three peers vs. two. Always an odd number,
greater than 1. Assumptions can't be made about the mathematics 
behind time, but in a reference model, odd numbers are better.

[Not to be confused with network timing, although the same clocks
 are used to provide sources for "time" over different layer 1/2/3
 protocols ]

-M



-----Original Message-----
From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu]On Behalf Of
Tony Li
Sent: Thursday, May 20, 2004 4:07 PM
To: Randy Bush
Cc: nanog@nanog.org
Subject: Re: ntp config tech note




One minor (operational! -- gasp) addition:

More modern copies of ntpd have a '-g' option that will allow
the clock to jump once at boot time.

Tony


On May 20, 2004, at 12:27 PM, Randy Bush wrote:

>
> sorry to take you away from discussing spam with an actual
> tech note, but twice this morning i have hit incidents where
> much needed ntp clients were blown.  so, as i was gonna have
> to write it up, i figured i would bore you all with it.
>
> ---
>
> ntp config hint
> 2004.05.20
>
> ntpd will not work if your clock is off my a few minutes.
> it just sits there forever with its finger in its ear.  so,
>
> at boot, before you start ntpd, use ntpdate to whack your
> system's time from a friendly low-numbered strat chimer.
>
> do not background ntpdate with -b, because, if it is slow to
> complete, ntpd can't get the port when you try to start it
> next in the boot sequence.
>
> if ntpdate takes a minute and thus adds to your boot time,
> then something is wrong anyway; fix it.
>
> in case your dns resolver is slow, servers are in trouble,
> etc. have an entry for your ntpdate chimer in /etc/hosts.
> yes, i too hate /etc/hosts; but i have been bitten without
> this hack; named is even more fragile than ntpd.
>
> once ntpdate has run, then and only then, start your ntpd.
> and read all the usual advice on configuration, selection
> and solicitation of chimers with which to peer, ...
>
> and then, if having accurate time on this host is critical,
> cron a script which runs `ntpq -c peers` and pipes it to a
> hack which looks to be sure that one of the chimers has a
> splat in front of it.  run this script hourly, and scream
> bloody hell via email if it finds problems.
>
> ---
>
> now back to your regular spam discussion.  /*
>
>    yes, spam is an important issue.  but, if your local
>    organization, this mailing list, ... gets swamped with
>    discussions of spam, then the spammers have won.
>
>    you have to compartmentalize it, in your organization and
>    in the general net culture.  that's why there are
>    separate mailing lists for spam, ddos, and other net crap
>    with which we have to deal.
>
>    that's why we have more than one mailing list in the
>    world, to compartmentalize so we can focus.
>
>    */
>
> randy
>




Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.