Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Overflow circuit

  • From: Alexei Roudnev
  • Date: Sat Mar 27 02:40:57 2004

VoIP over satellite? I am very sceptical about it. Better, forget such idea.



>
> You may want to look at using H.323 gatekeepers with CAC (Call Admission
> Control).
>
> Here is a link to a Whitepaper on this Subject.
>
>
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_white_paper09186a00800da467.shtml
>
> Patrick
>
> ----- Original Message ----- 
> From: "Mailing List Subscriptions" <jcc-list@thenetexpert.net>
> To: <nanog@merit.edu>
> Sent: Friday, March 26, 2004 7:54 PM
> Subject: Overflow circuit
>
>
> >
> >
> > I am looking for advice on technique or products that can solve the
> > following challenge ...
> >
> > Two private line T1's between A and B - one terrestial T1 with >200 ms
> RTT,
> > the other T1 is over satellite with ~500 ms RTT. The circuits are being
> used
> > for mixed VoIP (70%) and data (30%) applications. To achieve optimal
voice
> > quality, we want to route all VoIP calls over the terrestial T1 until it
> is
> > "full", then divert all subsequent VoIP calls over the satellite T1 (**
> > while existing VoIP calls continue to be routed over the terrestial T1).
> >
> > So it looks like I need per-flow (based on protocol, src IP, dst IP, src
> > port, dst port) routing. It looks like MPLS Traffic Engineering can do
the
> > job. Is there anything else that can it with less complexity?
> >
> > Ideas or recommendations?
> >
> >
> > Regards,
> > Joe
> >
> >
>





Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.