North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: OT: converting 100MB to OC-3 POS
- From: Joe Abley
- Date: Tue Sep 09 07:48:47 2003
On Tuesday, Sep 9, 2003, at 08:26 Canada/Eastern, Andy Walden wrote:
On Tue, 9 Sep 2003, Gil Levi wrote:
Can anyone help me convert a 100MB Ethernet interface to an OC-3 POS
interface in a small cheap box ?
Depends on what you mean by cheap? Ethernet<->POS isn't a conversion
per
say, but it could be switched or routed. The more expensive part will
probably be the POS interface. An RS 1000 would work. Maybe a 7300
also,
but it would cost twice as much I think.
http://www.riverstonenet.com/products/router_rs1000.shtml
If it's an interior application, and you are open to alternatives to
POS, you could use a cheap enterprise switch with an ATM uplink and do
RFC1483 bridging. It used to be the case that a cisco 2900XL with a
single OC3 ATM card was way cheaper than the cheapest cisco router that
could do OC3/POS. The 2900XL supported either SDH or SONET framing, if
your application involves a synchronous optical network and not just
dark fibre. You don't need an ATM switch (you can back-to-back the UNI
speakers across the SONET/SDH network).
Note also that "cheap" in "cheap enterprise switch" is relative and,
for the record, ATM is evil.
Joe
|
