North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
- From: Josh Gentry
- Date: Mon Feb 11 21:38:18 2002
I'm experimenting with using Zebra running on a Debian box to do OSPF with
the Ciscos on our network. The zebra box has 2 interfaces, each in a
different area. This is the first time we have tried to impliment
multiple areas on our network. Right now, area 51 consists only of the
zebra box and a Cisco 2500, and is just for testing.
The zebra box is forming a full adjacency with the Cisco in area 51 with
no problems. It will not, however, become fully adjacent with the DR and
BDR in area 0. This seems to be preventing the distrobution of routes to
the zebra box.
Distrobution of routes in area 51 works fine.
Here is my config, minus auth info.
! Zebra configuration saved from vty
! 2002/02/02 16:35:11
log file /var/log/zebra/ospfd.log
ip ospf authentication-key <password>
ip ospf message-digest-key <keyid> md5 <password>
ip ospf priority 5
ip ospf hello-interval 10
ip ospf dead-interval 40
ospf router-id 22.214.171.124
ospf abr-type cisco
network 126.96.36.199/24 area 0
network 188.8.131.52/24 area 51
area 0 authentication message-digest
area 51 authentication
Any insight would be appreciated. Thanks.