Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

zebra/ospf issue

  • From: Josh Gentry
  • Date: Fri Feb 08 01:40:12 2002

Folks,

I'm experimenting with using Zebra running on a Debian box to do OSPF with
the Ciscos on our network.  The zebra box has 2 interfaces, each in a
different area.  This is the first time we have tried to impliment
multiple areas on our network.  Right now, area 51 consists only of the
zebra box and a Cisco 2500, and is just for testing.

The zebra box is forming a full adjacency with the Cisco in area 51 with
no problems.  It will not, however, become fully adjacent with the DR and
BDR in area 0.  This seems to be preventing the distrobution of routes to
the zebra box.

Distrobution of routes in area 51 works fine.

Here is my config, minus auth info.

! Zebra configuration saved from vty
!   2002/02/02 16:35:11
!
hostname ospfd
log file /var/log/zebra/ospfd.log
service password-encryption
!
!
interface lo
!
interface eth1
 ip ospf authentication-key <password>
!
interface eth0
 ip ospf message-digest-key <keyid> md5 <password>
 ip ospf priority 5
 ip ospf hello-interval 10
 ip ospf dead-interval 40

!
router ospf
 ospf router-id 216.184.8.55
 ospf abr-type cisco
 ospf rfc1583compatibility
 network 198.59.115.0/24 area 0
 network 216.184.8.0/24 area 51
 area 0 authentication message-digest
 area 51 authentication
 redistribute static


Any insight would be appreciated.  Thanks.

Josh
jgentry@systemstability.org





Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.