|
North American Network Operators Group
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Historical
Re: IPSEC and PAT
- From: Bora Akyol
- Date: Thu Sep 13 23:34:08 2001
I believe that at least one VPN client also does UDP encapsulation for
IPSEC packets specifically for NAT traversal.
Bora
On Thursday, September 13, 2001, at 08:23 PM, Tony Rall wrote:
On Thursday, 2001/09/13 at 21:43 AST, "Steven M. Bellovin"
<smb@research.att.com> wrote:
I repeat -- it doesn't do PAT. Some "routers" -- they're really no
such thing, of course; they're NAT boxes and/or bridges -- allow one
host behind them to speak IPsec. If a host emits a packet using ESP,
it's tagged as *the* IPsec user; return IPsec packets are routed to
that host. (Some of these boxes may use manual configuration instead
or in addition.) You can't have two IPsec hosts, because there's no
way to know which should receive incoming packets -- there's no
relationship between inbound and outbound SPIs.
Actually you can have multiple IPSEC sessions hidden behind a NAT box
with
a single public IP address - we've found several vendors' "routers" that
can work in this environment. I believe the key is that each tunnel
must
be to distinct remote IP addresses. All the NAT box has available to
separate the traffic for the different tunnels (which use IP protocol
50)
is the address of the other end of the tunnel, but that is all it needs.
Of course, many users would like to have multiple tunnels to the same
partner. I don't know how that is possible with current IPSEC
technology.
Tony Rall
|
|
|
