Merit Network
Can't find what you're looking for? Search the Mail Archives.
  About Merit   Services   Network   Resources & Support   Network Research   News   Events   Home

Discussion Communities: Merit Network Email List Archives

North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Channelized T1's & Remote Access Routers

  • From: Roland Dobbins
  • Date: Fri Oct 06 19:51:23 2000

Yes, that's the feature to look for on the Adtran DSU and appropriate
module(s), drop-and-insert.

Steve Gibbard wrote:
> 
> The feature you're looking for is called drop and insert.  I don't think
> the channelized T1 modules for the Cisco 3640 will do it.  I don't know
> about the AS5300 off the top of my head, but Cisco's web site should say.
> 
> I was doing this with an Ascend Max 6000, and it worked.  I wouldn't
> recommend the Maxes, though, since unless something has changed in the
> last five months, we were never able to find a software version for it
> that supported v.90 and would stay up for more than a few weeks without
> needing to be rebooted.  Other dial-up terminal servers should be able to
> handle this too.  Look for "drop and insert" in the specs.
> 
> Inet-access is probably a better list for this discussion than nanog.
> 
> -Steve
> 
> On Fri, 6 Oct 2000, Karyn Ulriksen wrote:
> 
> >
> > I've been handling routing for web farms for quite a while and all my
> > clients have leased lines (T1's, T3's, etc) and haven't done much in the way
> > of dialup connects except for a portmaster here and there for backdoor
> > stuff.  As a result, I'm a little dumb about basic dial-up access and
> > equipment.
> >
> > What access router would I need to take in a channelized T1 that needs to
> > have 6 of the lines split out for feeds to a fax server and the remaining
> > used for dialup POPs?  I've been looking at the Ascend/Lucent SuperPipe 155
> > and the Cisco 36xx and 53xx, but wonder if those can split out the fax
> > server feeds I need from the T1.
> >
> > Any and all *constructive* feedback on this will be greatly appreciated.
> >
> > Karyn
> >
> 
> --------------------------------------------------------------------------------
> Steve Gibbard                           scg@gibbard.org

-- 
------------------------------------------------------------
 Roland Dobbins <rdobbins@netmore.net> // 818.535.5024 voice





Discussion Communities


About Merit | Services | Network | Resources & Support | Network Research
News | Events | Contact | Site Map | Merit Network Home


Merit Network, Inc.