North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
- From: Jamie Rishaw
- Date: Sat Oct 25 13:30:27 1997
- Rfc_violation: You saw it here first!
Todd R. Stroup wrote:
> Looking at the source for the looking-glass though it doesn't use the
> username option for rsh command. When useing the cisco command below
> don't you have to use the rsh username?
> ip rcmd remote-host www 22.214.171.124 nobody
> I changed the ip of the $ROUTER in lg.pl to
> "www\@ipaddress.of.router" instead of "ipaddress.of.router"
> which seems to work. I kept getting Permission Denied without it.
You need to make sure that in 'ip rcmd' that you have local-username
defined to something that there is a 'username xxx' entry on the cisco for.
In other words, if you have (sorry syntax is probably not correct):
ip rcmd remote-host joebob lookingglass.yourcompany.com daemon enable
you have to have a
'username joebob' entry on the cisco as well.
local-username means "apply the permissions of local-username when this rsh
and remote-username is the userid of whatever your cgi-bin runs as.. if your
web server is setuid "daemon" and cgi-bins are daemon, it will only work
if you have 'daemon' as a remote-username in the ip rcmd command.
jamie g.k. rishaw dal/efnet:gavroche __ IAGnet/CICNet/netILLINOIS Netops
DID:216.902.5455 FAX:216.623.3566 \/ 800.637.4IAGx5455
"It's like im being tied to the hood of a yellow rental truck being packed in
with fertilizer and fuel oil.. pushed over a cliff by a suicidal mickey mouse."